instruments
>
analog::blocks Power Prototype Boards
12 V Power & DC/DC Prototype Board for
etxal power input and DC/DC converter testing
User Manual (PDF)
Order No.: ABL-MPD-11-E11-12
Order No.: ABL-PPR-11-I02
last update 260914
analog::blocks Power Prototype Boards
Pre-routed Power Prototype Boards provide proven PCB layouts for developing custom power supplies and testing power conversion circuits. Different converter and regulator configurations can be adapted to project-specific voltage and power requirements.
USB Power Prototype Board
Order No.: ABL-PPI-11-U12
USB Dual DC/DC Prototype Board for auxiliary bipolar power supplies with USB isolation
User Manual (PDF)
Order No.: ABL-PPI-11-U21
USB Power Prototype Board
The USB Power Prototype Board provides a flexible platform for powering analog::blocks circuits directly from a USB port.
Depending on the component configuration, the USB 5 V supply can be connected directly to the +5 V rail or used with an isolated DC/DC converter to generate bipolar supply voltages such as ±9 V, ±12 V or ±15 V.
Different converter types can be fitted to adapt the board to project-specific voltage and power requirements.
Depending on the component configuration, the USB 5 V supply can be connected directly to the +5 V rail or used with an isolated DC/DC converter to generate bipolar supply voltages such as ±9 V, ±12 V or ±15 V.
Different converter types can be fitted to adapt the board to project-specific voltage and power requirements.
Order No.: ABL-PPI-11-U12
USB to ±30 V DC/DC Prototype Board
The pre-routed board provides a flexible platform for building higher-voltage bipolar power supplies using two DC/DC converters galvanically isolated from the USB supply.
The outputs are connected to the analog::blocks +PWR and −PWR rails.
The outputs are connected to the analog::blocks +PWR and −PWR rails.
USB Dual DC/DC Prototype Board for auxiliary bipolar power supplies with USB isolation
User Manual (PDF)
Order No.: ABL-PPI-11-U21
12 V Power & DC/DC Prototype Board
The 12 V Power & DC/DC Prototype Board provides direct external 12 V power input together with a position for an optional DC/DC converter.
The converter can be used to generate a negative supply rail or to evaluate and compare different DC/DC converter configurations.
The converter can be used to generate a negative supply rail or to evaluate and compare different DC/DC converter configurations.
12 V Power & DC/DC Prototype Board for
etxal power input and DC/DC converter testing
User Manual (PDF)
Order No.: ABL-MPD-11-E11-12
±12 V to ±5 V Linear Regulator Prototype Board
The pre-routed regulator board provides a simple platform for deriving the ±5 V rails from the existing ±12 V supply using 78L05 and 79L05 linear regulators.
Additional component positions for capacitors and ferrite filters allow different filtering and decoupling configurations to be evaluated without designing a dedicated PCB.
Additional component positions for capacitors and ferrite filters allow different filtering and decoupling configurations to be evaluated without designing a dedicated PCB.
Order No.: ABL-PPR-11-I02
last update 260914